Ebara DSC4 User Manual

CT 259-08-09Depto. Comercial e FábricaRua Joaquim Marques Figueiredo, 2-31 Bauru - SPFone: (14) 4009 0020 / 4009 0000Fax: (14) 4009 0011e-mail: baur

10INSTRUCTION MANUALModel DSC43.6.2 Insulation Resistance Measurement WARNING: ALL ELECTRIC WORK SHOULD BE PERFORMED BY A QUALIFIED ELECTRICIAN AND A

22INSTRUCTION MANUALModel DSC4 WARNING: WHEN LIFTING THE PUMP, USE APPROPRIATE CRANE (OR HOIST) AND LIFT SYSTEM.CHECK POSITION AND TIGHTNESS OF LIFT

12INSTRUCTION MANUALModel DSC43.6.3 Other Checks Requiring Particular Attention(1) Minimum operating water levelBe sure that the pump stop level is no

20INSTRUCTION MANUALModel DSC4 CAUTION: SINCE THE STARTING TORQUE ON LARGE PUMPS CAN BE POWERFUL, THE PUMP MUST BE SUPPORTED. DANGER: DURING CHECKING

14INSTRUCTION MANUALModel DSC43.8 Cable Installation (Fig. 13)When the pump has been installed, pull out the power cable, protective device cable, wat

18INSTRUCTION MANUALModel DSC45. Operation5.1 Operational LimitationsThis pump is designed to operate under the following conditions:(1) Liquid temper

16INSTRUCTION MANUALModel DSC4Table 2 (Example) (Source : Electrical Equipment Technical Standards, Ministry of International Trade and Industry).4

03Contents1. Preface …………………………………………..………...….………..2. Acceptance Inspection ……………………………………...…...…..3. Instal

04INSTRUCTION MANUALModel DSC41. PrefaceDesign of this EBARA pump is based on superior engineering and long experience. To prevent trouble and provide

28INSTRUCTION MANUALModel DSC4Fig. 24(4) Torque tableTable 4 WARNING: WHEN MACHINES SURFACES ARE DAMAGED AND MUST BE REPAIRED, USE AN APPROPRIATE GRI

06INSTRUCTION MANUALModel DSC43.3 Discharge Elbow Installation (Fig. 4) WARNING: WHEN LIFTING THE PUMP, USE APPROPRIATE CRANE (OR HOIST) AND LIFT SYST

26INSTRUCTION MANUALModel DSC4(2) Protect surfaces of mating fl anges and the corners of spigot and socket.(3) Cover the shaft threads to protect from

08INSTRUCTION MANUALModel DSC43.6 Check the Followings Points (1) through (6) Prior to Pump Installation (1) Ensure that the mechanical seal chamber

24INSTRUCTION MANUALModel DSC4(4) Rotor(a) After checking the oil, put your hand through the pump discharge and turn the impeller. If it turns smoothl